LORON DEVELOPMENT BOARD
Loron development board is a new generation IoT development module that can be programmed with Micropython and Arduino Ide. Loron development boards have NRF24L01 (2.4 GHz), WiFi and Bluetooth triple network.
You can buy the Loron development board and program it by connecting it to the computer with USB, and you can join the free development environment of Teleron with the Loron development module.
Loron development cards allow you to implement your projects quickly, as well as provide you the opportunity to communicate easily with the original software libraries that it offers to you as open source over long distances, wirelessly at 2.4GHz frequency, with the NRF24L01 wireless module on which the Loron development card is located.
At the center of this module is the ESP32-Wroom chip. Embedded chips are designed to be scalable and adaptable. There are two CPU cores that can be controlled separately, and the CPU clock frequency can be adjusted between 80 MHz and 240 MH.
The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the Internet through a Wi-Fi router. The Wi-Fi module allows users to easily connect to a mobile phone while using Bluetooth or broadcast low energy beacons for detection.
• Espressif ESP32 chipset
• Dual processor WiFi radio System on chip
• Semtech LoRa transceiver SX1276
• LoRaWAN stack
• A and C class devices
• Node range: up to 40 km
• 2 x UART, SPI, 2 x I2C, I2S, micro SD card
• Analogue channels: 8_12 bit ADCs
• Timers: 4_16 bits with PWM and input capture
• DMA (Direct Access Memory) in all electronic equipment
• GPIO: up to 24
• RAM: 4MB
• External flash: 8MB