CELLRON DEVELOPMENT BOARD
The Cellron development board is a next-generation IoT development module that can be programmed with Micropython and Arduino Ide. Cellron development cards have a triple network of 4G-LTE, WiFi and Bluetooth. With the 4G-LTE module, it makes it possible to send the desired data anywhere in the easiest way without knowing the distance.
Cellron is specially optimized for M2M and IoT applications and offers communication with high data rates. Cellron is a unique development board in this field that offers many features to users as well as providing distance-free communication with these features. Cellron development cards is a development card that provides you with full flexibility with the ability to provide real-time networking with the Quectel EC25 4G/LTE module that it has on it.
Cellron is a powerful, generic Wi-Fi+BT+LTE MCU module that targets a wide range of applications, from low-power sensor networks to the most demanding tasks such as audio encoding, music streaming and MP3 decoding.
In the center of this module is the ESP32-Wroom chip. The embedded chip is designed to be scalable and adaptable. There are two CPU cores that can be controlled separately, and the CPU clock Dec can be set between 80 MHz and 240 MHz. The user can also turn off the CPU and use the low-power coprocessor to constantly monitor peripherals for changes or exceeding thresholds. The ESP32 integrates a rich set of peripherals such as capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C.
• Espressif ESP32 chipset
• Dual processor WiFi radio System on chip
• 2 x UART, 2 x SPI, I2C, micro SD card
• Analog channels: 8_12 bit ADCs, 2_8 bit DAC
• Timers: 2_64 bits with PWM up to 16 channels
• DMA (Direct Access Memory) in all electronic equipment
• GPIO: up to 22
• 802.11b/b/n 16mbps
• Power: 12mA in active mode, 5uA in standby mode Bluetooth
• Low energy and classic
• Compliant with Bluetooth v4.2 BR/EDR and BLE specification
- Range up to 1 km